28 Products Found

XPF-DN100 COMPANION FLANGE DN100 PN16 ALUMINUM   X651-ST-KIT CROSSFIRE BASE CONVERSION KIT - 5"STORZ   X651-SP-KIT CROSSFIRE BASE CONVERSION KIT - 4"STORZ   XFF-B TRUCK ADAPTER BSP THREADS   X940-NJ-KIT CROSSFIRE BASE CONV KIT - (2) 2.5"NHF   XFF-MPL FLANGE MOUNT 3" ANSI 150 INLET (75mm)   XFF-SPOOL46 SPOOL PIECE 4"ANSI 150 X 7.25"LONG STEEL   MST-4BJ-M 4 STACKED TIPS 2.5"BSP - METRIC   X940-BP-KIT CROSSFIRE BASE CONV KIT - (2) 4.0"BSPM   XFF-APL TRUCK ADAPTER, 3.0" NPT FEMALE Can be screwed directly on a 3.0" NPT (75mm) male thread. This compact, hardcoat anodized adapter allows the Crossfire monitor to be easily utilized as a truck mounted deluge appliance. 4.5" dia. (110mm) Height: 5.0". (125mm)   XF-B CROSSFIRE STORAGE BRACKET A 13 ga., 304 stainless steel bracket with strap holds the Stow-A-Way 800, Stow-A-Way 1250 or the Safe-Tak 1250 portable base securely while being transported. This 14.75" x 7.75" x 2" (37.5 x 19.7 x 5.1cm)bracket can be mounted vertically or horizontally in any position, including the top or underside of a shelf, on a side wall, or on a compartment door. Includes quick release storage strap.   XFF-CPP COMPANION FLANGE KIT 4" ANSI 150 4" NPT, 150 lb. ANSI aluminum, gasket included. Uses 5/8" (15.8mm) bolts (not included)   XFF-DN80 FLANGE MOUNT DN80 PN16   MPST-4BJ METRIC STACK TIPS   XF-SS10-BJ STREAM STRAIGHTENER 10" 2.5"BSP THREADS   XFF-CAP TRUCK MOUNT CAP   X960-KIT SPIKE PARTS SET   XPF-DN80 COMPANION FLANGE DN80 PN16 ALUMINUM   XG18XL-XL EXTEND-A-GUN PIPE A simple and cost effective way to easily add 16" to your Crossfire Deck gun outlet connection. Simply remove the Crossfire monitor from the existing truck mount adapter, add the Extend-A-Gun Pipe and connect the Crossfire top. Increases the field of fire by raising the Crossfire monitor to clear obstructions on the top of the apparatus. Utilizes the same quick connect features of the Crossfire monitor. Visually verifiable rotation lock and locking mechanism. Extend-A-Gun Pipe is made from hard coat anodized aluminum alloy for light weight and corrosion resistance. Not for use on Extend-A-Gun telescoping waterway. Not for use on portable ground base.   XF-SS5 STREAM STRAIGHTENER 5" L. 2.5" NH (65mm) THREADS   XF-SS10 STREAM STRAIGHTENER 10" L. 2.5" NH (65mm) THREADS Extruded aluminum vanes straighten smooth bore streams to provide greater reach with less turbulence. 2.5" NH (65mm) RIGID inlet and outlet threads are standard.   XF-SS5-NN STREAM STRAIGHTENER 5" L. 3.5" NH (89mm) THREADS Same as XF-SS5 above but with 3.5" NH (89mm) inlet x 2.5" NH (65mm) outlet.   XFH-2BIC-EN SAFE-TAK BASE - 2.5"BIC MALE INLETS   MST-4BJ 4 STACKED TIPS 2.5"BSP   MST-4NJ 4 STACKED TIPS, 2.5" NH (65mm) Designed for monitor use, these lightweight tips are hard coat anodized, allow four orifice options in one, and have pressure/flow charts laser engraved on each tip. 2.5" NH (65mm) swivel coupling is standard. Orifice openings are 2", 1.75", 1.5", and 1.375". (50mm, 45mm, 38mm and 35mm)   XF-SS10-NN STREAM STRAIGHTENER 10" L. 3.5" NH (89mm) THREADS Same as XF-SS10 above but with 3.5" NH (89mm) inlet x 2.5" NH (65mm) outlet.   XF-SS5-BJ STREAM STRAIGHTENER 5" 2.5"BSP THREADS   XF500-KIT VALVE UPGRADE KIT